Powerfully Purposeful Design

Our XMU extractor represents nearly a decade of research, development, and expertise in hydrocarbon extraction. This versatile machine is the ultimate feature rich platform in cannabis extraction equipment and technology, designed with the creation of high value extracts in mind. The XMU is prepared to produce anything you’re doing next.

Cannabis Extraction Equipment Precision XMU
PSI Certified

C1D1 Compliant & Designed for GMP integration
PSI Certified – 50 State Compliant

XMU Hydrocarbon
Cannabis Extraction Equipment

Suitable for
Cannabis & Hemp

Solvents
Butane, Propane & Blended

Capacity Per Batch
8.5 lb

Cycle time
20-30 minutes

Capacity
Up to 200+ lb, per 8-hr shift

Extracts
Isolate/Sauce, Distillate, Vape Pens, Shatter, Wax/Sugar, Tincture and Edibles

Compliance
C1D1 Compliant
Designed for GMP integration
PSI Certified – 50 State Compliant

PSI Certified

Size: 62” L x 36”W x 77” H
Warranty: 1-Year

  • Integrated Falling Film Solvent Recovery

  • 9:1 Solvent to Biomass Ratio

  • Optimized Process Monitoring

  • Liquid Jacketed Solvent Tanks

  • No Swapping Lines

  • Fully Integrated CRC

Efficient
Integrated Falling Film Solvent Recovery
leaf
9:1 Solvent to Biomass Ratio
monitor
Optimized Process Monitoring
solvent
Liquid Jacketed Solvent Tanks
connect
No Swapping Lines
crc
Fully Integrated CRC
  • Individual control of solvent, vacuum, nitrogen, and venting via centralized instrumentation panel for ease of operation
  • Optional material column socks for fast material hot-swap
  • Jacketed material column allowing for optional cooling or vacuum insulation
  • Liquid solvent dispersion system included standard
  • Panel mounted chiller, heater, nitrogen, and vacuum utility connection ports
  • Vacuum/fluid jacketed surge tanks allow for full solvent capacity storage post-extraction for controlled CRC metering and process flexibility
  • Inline CRC with optional bypass (included) and full integrated filter system
  • High precision metering valve for measured, repeatable flow into included CRC column
  • Collection bowl digital temperature readout for optimized process monitoring
  • Crosscurrent heat exchanger for increased efficiency and recovery rates
  • High-efficiency design allowing for passive recovery rates up to 5 lb/min
  • Dual collection sight glasses for optimal process monitoring
  • Easy to use, two-bolt compliant tri-clamp service connections
  • Pre-plumed parallel routing with dedicated inlet and outlet for chiller, heater, nitrogen and vacuum connections
  • Bottom 1″ tri-clamp connection for simplified cleaning and aftermarket accessory connection
  • Class 1, Division 1 (C1D1) Compliant
  • Designed for GMP integration
  • PSI Certified – 50 State Compliant
  • Designed to ASME standards
  • Designed to meet 3A sanitary standards
  • NFPA 58 LPG
  • Engineer Peer Reviewed
  • Made in USA

Not sure what this means? We have a Compliance 101 article if you’re new to the industry or you can contact us directly.

  • Dimensions: (approx.) 62″ L x 36″ W x 77″ H
  • Weight: 1,200 lb
  • MAWP: 350 PSIG
  • Warranty: One-Year

Precision offers the following on-site training programs with our experienced extraction technicians.

Expand your team’s extraction skills by adding the following course:

Elevating Hydrocarbon Extraction

Cannabis Extraction Equipment Precision XMU Zoom

True to our core value of always be innovating, our XMU system was designed to squeeze out every ounce of performance and efficiency in primary cannabis extraction equipment.  Whether turning low quality biomass into high value products through integrated CRC refinement, or running ultra-cold for live resin or sauce products, the XMU does it all in a single platform.

Cannabis Extraction Equipment Tanks
Precision XMU Passive Solvent Recovery
Rethinking Solvent Recovery

Unlike traditional solvent recovery, our expertly designed and integrated falling film style recovery system recovers up to 3 times faster than previous X-Series extractors from Precision. Making the XMU the fastest, most efficient platform on the market today! No gas compressor or pump required.

Cannabis Extraction Equipment Sight Glasses
Operate With Confidence

Eliminating the typical guesswork while extracting was a detail not overlooked. Eye level sight glasses allow you to quickly and easily confirm solvent fill levels, and a digital temperature readout on the collection bowl allows you to monitor the raw extract temperature throughout the process, so you’re not overheating your cannabis oil.

Cannabis Extraction Equipment Sight Glasses
Precision XMU Hydrocarbon Extractor Control Panel
Insightful Design

We’ve listened to our professional technicians and designed a simple, centralized instrumentation panel for solvent, vacuum, nitrogen, and venting controls, allowing for operator ease of use and optimal hose management in the lab. Our bottom 1″ tri-clamp connection also provides a significantly easier to clean outlet and ability to add an aftermarket accessory connection.

Cannabis Extraction Equipment Gauge Precision XMU
Compliant For Tomorrow

The XMU Hydrocarbon extractor is C1D1 compliant, engineer peer reviewed, and made entirely in the USA. Built to full 3A sanitary and cGMP standards, the XMU has been engineered with future state compliance in mind to protect your safety as well as your investment making it the best cannabis extraction equipment on the market.

Talk To A ReP
Cannabis Extraction Equipment Gauge Precision XMU

Product Walkaround

Get a Quote
PSI

Pre-Approved for Easy Certification

The XMU Hydrocarbon Extractor is pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our cannabis extraction equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your system is installed by a Precision Technician, simply call PSI and schedule your field verification. Simple as that!

PSI

Pre-Approved for Easy Certification

The XMU Hydrocarbon Extractor is pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our cannabis extraction equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your system is installed by a Precision Technician, simply call PSI and schedule your field verification. Simple as that!

Butane Cannabis Oil Extracts

Award Winning Extracts

Our cannabis oil extraction equipment produces more award-winning concentrates than any other brand. Why? Because we refuse to sacrifice our standards. High-quality products require high-quality extraction.

Butane Cannabis Oil Extracts

Complete Your Lab

Precision’s post-processing equipment

RV 100 Vessel
RV 100

Reactionary Vessel

Learn More
EXP Room C1D1 Room
EXP Room

C1D1 Enclosures

Learn More
FP1 Filter Press
FP1 Filter Press

Filtration

Learn More
TG-6 Cannabis Distillation
TG-6

Distillation

Learn More
Cannabis Extraction Equipment Financing

Financing Available

Acquiring extraction equipment is likely one of the most substantial and important capital investments you will make for your business. Our financing partners make the acquisition fast, easy, and economical.

View Lending Partners

I’m Interested In Learning More

To speak with a Precision sales representative or receive a quote, please complete the form below.