This package is perfectly paired for a hydrocarbon or ethanol cannabis extraction lab. Every piece of extraction equipment and fitting required to build a large-scale lab is accounted for in this package – including the C1D1 room, installation and on-site training. Truly a turn-key solution! Get operational faster with the experts in extraction.

Extraction Lab Package X40

X40 Extraction Lab Package

Now $366K | Save $40K

MSRP $406K

TALK TO A REP

Standard Package

Extractor

X40 MSE Extractor (details)

  • Butane, propane or blended solvents
  • 10-72 lbs per hour processing (ethanol)*
  • Up to 36 lbs per hour processing (butane or propane) depending on blend*
  • 55-85 minute* cycle time
  • Up to 578 lb, per 8-hour shift
  • Great for making isolate/sauce, distillate, vape pens, shatter, wax/sugar, tinctures and edibles
  • C1D1 Compliant & PSI certified – 50 state compliant

C1D1 Room

EXP2 Room (details)

  • Pre-fabricated and ready-to-assemble enclosures
  • 20’W x 8’H x 12’6″D working dimensions
  • No exposed cables or wires
  • Includes fittings and wiring for installation
  • Includes exhaust, purge & gas detection kits
  • 1-day installation
  • OSHA compliant and engineer peer reviewed
  • For use in all regulated jurisdictions†

Pumps

Welch CRVpro16 Pump
GC 5000 Gas Compressor (details)
GC 5000 Condenser Coil Tank
Welch CRVpro 30 Vacuum Pump
Across International T40x Stainless Cold Trap

Heaters/Chillers

Huber Unistat 825
Julabo SL-26 w/ Booster
Huber CS 100

Vacuum Ovens

Across International AT50 5.0 cu ft Vacuum Oven – 4 Qty

Package Upgrades

Package Upgrades

Upgrade Package

Increase system throughput with:

  • Jacketed material columns for X40 Extractor
  • Julabo Presto A80 – 2 Qty
  • includes all necessary upgraded hoses, fittings and connections

*inquire for pricing

Package Includes

install

3-Day Installation
& Training
(see details below)

install

All Required Hoses,
Fittings & Fluids

install

Lab Plan & Design
(see details below)

install

Free
Shipping

Advertised discount available for domestic orders only. For Canadian package pricing, please contact a Precision sales representative.

Equipment Specifications

Features:

  • Flexible setup and ergonomically friendly design
  • Precise control over primary extraction
  • Approximately 100L, 30-36 lb average material capacity per batch
  • Removable material baskets for easy load/unload
  • 4 material vessels for easy nonstop operation
  • 1/2” PTFE/SS feed hosing (UL-21 compliant)
  • Viton/PTFE gaskets
  • AN compression fittings
  • Polished SS components
  • Baffled jacketing on collection vessel
  • Vacuum jacketing on solvent vessel with internal cooling coil
  • Expansion column designed for desiccant assisted moisture removal
  • N2 assisted extraction up to 200 PSI

Compliance:

  • PSI Certified in all 50 states
  • ASME-U
  • NFPA 58 LPG
  • Class 1, Division 1 Compliant
  • Trans-fill approved per NFPA
  • Compliant in all regulated jurisdictions*
  • Engineer peer reviewed for all Type 6 & Type 7 licenses
  • CRN registered in ALL Canadian provinces

Specifications:

  • Dimensions (approx.) 184″ L x 44″ W x 83″ H
  • Weight 2,150 lb
  • Shipping Weight 3,000 lb
  • MAWP 250 PSIG
  • Ethanol Used Per Batch 100L
  • Chiller Pairing Recommendations Huber Unistat 825, Julabo equivalent, or better
  • Warranty** One-Year

Hydrocarbon Specifications:

  • Volatile, EPR reviewed, closed loop, Type 7 process for licensed operations (when used with hydrocarbon solvent)
  • Compatible with singular and mixed hydrocarbon solvents for
    superior extraction capability and product production
  • Approximate 45 minutes processing time per run (single material column)
  • Approximate 2 hours processing time per run (4 material columns)
  • Certified for Class 1, Division 1 environments
  • 97% cannabinoid and terpene removal
  • Customized hydrocarbon extraction for high end product production, e.g., HTFSE, THC-a crystalline and “Sauce”

Ethanol Specifications:

  • Non-volatile, EPR reviewed, closed loop, Type 6 process for licensed operations (when used with ethanol solvent)
  • Pressurized Cold Ethanol Extraction (PCEE) for superior full spectrum cannabinoid and terpene removal (up to 200 PSI)
  • Solvent recovery requirement of 100L per hour needed to keep up with the system
  • 95%+ cannabinoid and terpene removal
  • Up to 3 runs per solvent batch

Features:

  • Comes with all fittings and wiring for installation
  • Designed to reduce the number of joints and seams in the cabin’s construction
  • Pre-coated, dual-skin insulated panels provide a smooth fit and finish with no exposed wires or cables
  • Catalytic bead UL listed flammable gas detection with adjustable set point between 10-50% LEL
  • Audible and visual UL listed and IFC compliant alarming systems
  • Explosion proof manual pull station activates high CFM fan but not alarms for off-gassing
  • Booth features vertical wall panels designed to reduce the number of joints and seams in the cabin’s construction
  • Includes gas detection, exhaust and purge kits. See EXP product page for exact kit specifications.

Compliance:

  • UL Listed Components
  • NFPA sections: 33, 58, 70, 101
  • OSHA Safety and Health Standards compliant
  • International Fire and Building Codes 2018
  • PSI Certified in all 50 states

Specifications:

  • Working Dimensions: 20’W x 8’H x 12’6″D
  • Approx. Overall Dimensions: 20’5″W x 8’8″H x 13’11″D
  • Weight: 5,365 lb
  • Shipping Weight: 5,972 lb
  • Total Power Consumed: 4kW @ 110V
  • Flow Emergency: 100 LFPM
  • Linear Plane Static: 1 CFM per 1 CF
  • Min. Fan Static: 2,300 CFM
GC 5000 Gas Compressor w/NEMA Switch

  • Up to 1-5 lb per minute recovery speed (depending on solvent)
  • Oil-less pistons
  • PTFE seals for leak proof protection
  • NEMA7 switch for easy install
  • Designed for minimal maintenance
  • C1D1, Group D compliant
  • Class II, Groups F & G compliant
  • Ul listed and CSA certified motor and NEMA starter switch
  • 240 Volts, 60 hZ, 11 Amps
  • Max. Discharge Temp: 250°F (176°C)
  • Inlet/Outlet Size: 3/4″ (can be reduced)
  • 1-year warranty
  • 41″L x 33″W x 50″D

GC 5000 Condenser Tank w/ Coil

  • Vacuum jacketed
  • Cooling requirements: 4.5kW chiller @ -20°C (Huber CS 100)
  • Lower temperatures can be reached with dry-ice (-500 lb/day)
  • Process Coil Volume: 2L
  • Condenser Tank Volume: 24L
  • Weight: 60 lb
  • 14.5″L x 25″W x 20″H

Welch CRVpro16 Rotary Vane Vacuum Pump

  • Power requirements: 110-120V/10.9A/208-240V, 5.4A, 60Hz, 1Ph
  • Free air displacement: 12.8
  • Explosion proof motor rating: Class 1, Groups C&D, Class 2, Groups F&G
  • Explosion proof motors require conduit wiring installation by a certified electrician.

Welch CRVPro 30 Rotary Vane Vacuum Pump

  • Power requirements: 115V or 230V
  • Free air displacement: 22.1 @ 60Hz
  • Runs 10°C cooler than comparable pumps and slows corrosion.
  • Has 40% larger oil capacity than comparable pumps.
  • Has chemical resistant coating in the oil case and pump module to protect non-moving parts.
  • Consumes up to 36% less oil than comparable pumps.
  • Dimensions: 22.4″L x 8.1″W x 11.4″H

Across International T40x Stainless Cold Trap

  • Temperature: -40°C (-40°F)
  • 316L stainless steel for trap and all vacuum connections
  • No chilling fluid needed, plug-n-play
  • No dry ice or liquid nitrogen needed
  • ETL tested to UL and CSA standards
  • Large 4.6L trap capacity
  • 1-year warranty
  • Electrical requirements: 110V or 220V, 60Hz 1-PH, 730 watts
  • 13″W x 18″D x 30″H

Across International AT50 5.0 cu ft Vacuum Oven – 4 Qty

  • Power: 110V, 60hZ
  • Door sealing gastet: Silicone
  • 7 pan shelves included
  • Comes with heavy duty steel mobile carts
  • Easy to clean stainless steel interior
  • Adjustable gas back fill capacity
  • 3″ thermal insulation prevents heat loss
  • UL and CSA Certified
  • 2 year warranty and lifetime US-based parts and service support

Huber Unistat 825 (standard package)

  • Temperature: -85…250°C
  • Heating Capacity: 3 kW
  • Cooling Capacity w/ Thermooil:
    • at 250C: 2,3 kw
    • at 200C: 2,3 kw
    • at 100C: 2,3 kw
  • Cooling Capacity with Ethanol:
    • at 0C: 2,2 kw
    • at -20C & -40C: 2 kw
    • at -60C: 1,4 kw
    • at -80C: 0,3 kw
    • at -85C: 0,2 kw
  • Cooling Machine: Air-cooled, CFC & HCFC-free
  • Power Supply: 208V 3~60Hz
  • Current Max: 20A
  • Pump Connections: M30
  • Dimensions: 460W x 604D x 1165H (mm)

Julabo SL-26 w/ Booster (standard package)

  • Temperature: +20…+300°C
  • Heating capacity: 3 kW
  • Power requirements: 230V/60Hz
  • Pump connections: M16 male
  • Dimensions: 14.2″W x 24″L x 18.5″H

Huber CS-100 (standard package)

  • Temperature: -20C up to +25C
  • Heating Capacity: 1,5 kW
  • Cooling Capacity: 10W at 10C water supply temperature and max. 32C ambient temperature
  • Cooling Machine: Air-cooled, CFC- & HCFC-free
  • Power Supply: 208V 3~60Hz or 460V 3~60Hz
  • Current Max: 7,7A
  • Pump Connections: G3/4″ male
  • Dimensions: 800W x 850D x 1665H (mm)

Julabo Presto A80 – 2 Qty
(upgrade option for Huber Unistat 825)

  • Temperature: -80°…+250°C
  • Heating Capacity: 1.5 kW
  • Cooling Capacity
    • at 20C: 1.2 kW
    • at 0C: 1.2 kW
    • at -20C, 1.1 kW
    • at -40C 1.1 kW
    • at -80C 0.1 kW
  • Cooling of compressor: 2-stage air
  • Power requirements: 208V/60Hz/15A (Nema N5-20 plug)
  • Pump connections: M24x1.5 male

Choose between the following lab design solutions:

Option 1: Off-The-Shelf Lab Plan

Pre-developed, economical design packages from our on-staff architects and MEP engineers for some of the most common lab layouts & equipment packages utilizing Precision® extraction equipment. Explains general hazards & workflows, power, water and airflows.

  • Quickest, time-saving design solution
  • Explains general hazards & workflows, power, water and airflows.

Includes:

  • Diagrammatic floor plans with suggested sizes
  • Estimated MAQ/HMIS table (w/ disclaimers)
  • Lab plan with equipment tags
  • Interior lab elevations
  • Diagrammatic workflow plans
  • Diagrammatic MEP drawings

Excludes:

  • Fire report
  • Permit drawings
  • Plan revisions
Option 2: Custom Concept Lab Plans

Provides a conceptual drawing package, showing the location of rooms, makeup of walls, and location of equipment for the lab within the building. MEP engineering plans are NOT included.

  • Approx. 2-4 weeks for completion
  • Plans are customized for extraction and post processing equipment
  • Great for investors, city planning officials and state license board presentation.

Includes:

  • Full custom lab design within specific client building
  • Cover sheet
  • Floor plan with dimensions and ratings
  • Full HMIS report
  • Lab plan with equipment tags
  • Interior lab elevations
  • Workflow plans (lab & solvent)

Excludes:

  • Fire report
  • Permit drawings
  • Plan revisions
The Basic Install and Training course is Precision’s all-encompassing primary extraction system installation and training program. Three days of on-site hands-on training, support and knowledge packed into one extremely valuable package is included in the PX1 Extraction Lab Package.

3-Day, Basic Install and Training Course Overview

Ready To Get Started?

Contact us to receive your package quote, discuss upgrades or get answers to any questions you might have.

Request My Quote
PSI

Pre-Approved for Easy Certification

The X40 extractor, GC 5000 compressor & condenser, and EXP2 Room are all pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your equipment is installed by a Precision® Technician, simply call PSI and schedule your field verification. Simple as that!

PSI

Pre-Approved for Easy Certification

The X40 extractor, GC 5000 compressor & condenser, and EXP2 Room are all pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your equipment is installed by a Precision® Technician, simply call PSI and schedule your field verification. Simple as that!

Extraction Lab Package Finance

Financing Your Extraction Lab Package

Acquiring extraction lab equipment is likely one of the most substantial and important capital investments you will make. The acquisition of a Precision extraction lab package can be fast, easy, and economical with our hand-picked financial partners.

View Lending Partners

I’m Interested In Learning More

To speak with a Precision sales representative or receive a quote, please complete the form below.