Every piece of equipment and fitting needed to build a mid-scale hydrocarbon or ethanol cannabis extraction lab – including the C1D1 room, installation and on-site training! The x40 Lab Package is truly a turn-key solution for processors. Start producing faster with a perfectly paired extraction equipment package from the experts in extraction.

Extraction Lab Package X10

X10 Extraction Lab Package

Now $242K | Save $27K

MSRP $269K

TALK TO A REP

Standard Package

Extractor

X10 MSE Extractor (details)

  • Butane, propane or ethanol
  • 10-27 lbs per hour processing (ethanol)
  • Up to 10 lbs per hour processing (butane or propane)
  • 55-85 minute* cycle time
  • Up to 200 lb, per 8-hour shift
  • Great for making isolate/sauce, distillate, vape pens, shatter, wax/sugar, tinctures and edibles
  • C1D1 compliant & PSI Certified – 50 state compliant

C1D1 Room

EXP1 Room (details)

  • Pre-fabricated and ready-to-assemble enclosures
  • 10’W x 8’H x 12’6″D working dimensions
  • No exposed cables or wires
  • Includes fittings and wiring for installation
  • Includes exhaust, purge & gas detection kits
  • 1-day installation
  • OSHA compliant and engineer peer reviewed
  • For use in all regulated jurisdictions†

Pumps & Cold Traps

Welch CRVpro8 Pump
GC 5000 Gas Compressor (details)
GC 5000 Coil Condenser Tank
Edwards nXDS10iC 7.5cfm Dry Scroll Pump
Across International T40x Stainless Cold Trap

Heaters/Chillers

Huber CC-902 *upgrade available
Julabo SL-12
Huber CS-100

Vacuum Ovens

Across International AccuTemp 3.2 ft Vacuum Oven – (Qty 2)

Package Upgrades

Package Upgrades

Upgrade Package

Increase system throughput with:

  • Julabo Presto A80 – 2Qty
  • includes all necessary upgraded hoses, fittings and connections

*inquire for pricing

Package Includes

install

3-Day Installation
& Training
(see details below)

install

All Required Hoses,
Fittings & Fluids

install

Lab Plan & Design
(see details below)

install

Free
Shipping

Advertised discount available for domestic orders only. For Canadian package pricing, please contact a Precision sales representative.

Equipment Specifications

Features:

  • Small footprint and ergonomically friendly design
  • Precise control over primary extraction with our Precision® Low Temp Ball Valves
  • Approximately 28L, 10 lb average material capacity per batch
  • Removable material baskets for easy load/unload
  • Proprietary basket micro-filtration for lipids
  • 1/2” PTFE/SS feed hosing (UL-21 compliant)
  • Viton/PTFE gaskets
  • Inline dewaxing capable of -70°C
  • Vacuum jacket insulated solvent/dewax vessels
  • Expansion column designed for desiccant assisted moisture removal
  • Clampless mounting for easy loading/unloading
  • N2 assisted extraction up to 200 PSI
  • Ultra-efficient internal temperature coil mechanisms
  • Pre-plumbed for chillers and heaters
  • Patent-pending vessel temperature control systems

Compliance:

  • PSI certified in all 50 states
  • ASME-U
  • NFPA 58 LPG
  • Class 1, Division 1 Compliant
  • Trans-fill approved per NFPA
  • Compliant in all regulated jurisdictions*
  • Engineer peer reviewed for all Type 6 & Type 7 licenses
  • CRN registered in Ontario, British Columbia, and Quebec

Specifications:

  • Dimensions (approx.) 44″ L x 46″ W x 69″ H
  • Weight 375 lb
  • Shipping Weight 635 lb
  • MAWP 250 PSIG
  • Ethanol Used Per Batch 32L
  • Warranty** One-Year

Hydrocarbon Specifications:

  • Volatile, EPR reviewed, closed loop, Type 7 process for licensed operations (when used with hydrocarbon solvent)
  • Compatible with singular and mixed hydrocarbon solvents for superior extraction capability and product production
  • Approximate cycle time of 55-85 minutes when used with GC 5000 compressor
  • Certified for Class 1, Division 1 environments
  • 97% cannabinoid and terpene removal

Ethanol Specifications:

  • Non-volatile, EPR reviewed, closed loop, Type 6 process for licensed operations (when used with ethanol solvent)
  • Pressurized Cold Ethanol Extraction (PCEE) for superior full spectrum cannabinoid and terpene removal (up to 200 PSI)
  • Approximate 15L/h recovery rate with 50L UL listed rotovap
  • Approximate 2.25 h processing time per run (10-27 lb single batch with full recovery) *with 50L rotovap
  • 3 h processing time (triple batch with full recovery)
  • 95%+ cannabinoid and terpene removal
  • Up to 3 runs per solvent batch

Features:

  • Comes with all fittings and wiring for installation
  • Designed to reduce the number of joints and seams in the cabin’s construction
  • Pre-coated, dual-skin insulated panels provide a smooth fit and finish with no exposed wires or cables
  • Catalytic bead UL listed flammable gas detection with adjustable set point between 10-50% LEL
  • Audible and visual UL listed and IFC compliant alarming systems
  • Explosion proof manual pull station activates high CFM fan but not alarms for off-gassing
  • Booth features vertical wall panels designed to reduce the number of joints and seams in the cabin’s construction
  • Includes gas detection, exhaust and purge kits. See EXP product page for exact kit specifications.

Compliance:

  • UL Listed Components
  • NFPA sections: 33, 58, 70, 101
  • OSHA Safety and Health Standards compliant
  • International Fire and Building Codes 2018
  • PSI Certified in all 50 states

Specifications:

  • Working Dimensions: 10’W x 8’H x 12’6″D
  • Approx. Overall Dimensions: 10’5″W x 8’2″H x 13’11″D
  • Weight: 3,383 lb
  • Shipping Weight: 3,690 lb
  • Total Power Consumed: 2kW @ 110V
  • Flow Emergency: 100 LFPM
  • Linear Plane Static: 1 CFM per 1 CF
  • Min. Fan Static: 1,200 CFM

GC 5000 Gas Compressor w/NEMA Switch

  • Up to 1-5 lb per minute recovery speed (depending on solvent)
  • Oil-less pistons
  • PTFE seals for leak proof protection
  • NEMA7 switch for easy install
  • Designed for minimal maintenance
  • C1D1, Group D compliant
  • Class II, Groups F & G compliant
  • Ul listed and CSA certified motor and NEMA starter switch
  • 240 Volts, 60 hZ, 11 Amps
  • Max. Discharge Temp: 250°F (176°C)
  • Inlet/Outlet Size: 3/4″ (can be reduced)
  • 1-year warranty
  • 41″L x 33″W x 50″D

GC 5000 Condenser Tank w/ Coil

  • Vacuum jacketed
  • Cooling requirements: 4.5kW chiller @ -20°C (Huber CS 100)
  • Lower temperatures can be reached with dry-ice (-500 lb/day)
  • Process Coil Volume: 2L
  • Condenser Tank Volume: 24L
  • Weight: 60 lb
  • 14.5″L x 25″W x 20″H

Welch 5.6 CFM CRVpro8 Explosion Proof Rotary Vane Vacuum Pump

  • Power requirements: 110-120V, 8.5A/208-240V, 4.5A, 60Hz, 1Ph
  • Free air displacement: 5.6 CFM (158 lpm)
  • Explosion proof motor rating: Class 1, Groups C&D, Class 2, Groups F&G
  • Explosion proof motors require conduit wiring installation by a certified electrician.
  • Dimensions: 18.2″L x 6.1″W x 9.1″H

Edwards nXDS10iC 7.5cfm Dry Scroll Pump

  • Power requirements: 100-127V~10A, 50-60Hz, 280 watts
  • Displacement: 12.7m3h-1
  • Operating temperature range: 10-40°C/41-104°F
  • CE and UL Certified
  • 1 year warranty
  • Chemical and corrosion resistant Chemraz internal valves and stainless steel fittings
  • Lubricant-free within the vacuum envelope and hermetically sealed means clean and dry vacuum in order to prevent cross-contamination
  • 20 times quieter than other pumps

Across International T40x Stainless Cold Trap

  • Temperature: -40°C (-40°F)
  • 316L stainless steel for trap and all vacuum connections
  • No chilling fluid needed, plug-n-play
  • No dry ice or liquid nitrogen needed
  • ETL tested to UL and CSA standards
  • Large 4.6L trap capacity
  • 1-year warranty
  • Electrical requirements: 110V or 220V, 60Hz 1-PH, 730 watts
  • 13″W x 18″D x 30″H
Across International AccuTemp 3.2 ft Vacuum Oven – 2 qty

  • Power: 110V, 60hZ
  • Range: ambient to 250C (or 480F)
  • Door sealing gasket: Silicon
  • UL and CSA Certified
  • 3 aluminum heating shelves with individual, in-shelf temperature sensor, temperature controller and heater
  • New KF25 inlet filter keeps oven clean at all time
  • All stainless steel internal tubing, vacuum and vent valves, and interior.
  • Oil-filled mechanical vacuum gauge
  • 4th gen low proportional gain temperature controllers keep your oven temp accurate
  • Built-in circuit breaker, overheat shutoff protection, secondary over-temp protection dial
  • 2-year warranty and lifetime US-based parts and service support
  • Dimensions: 30.5″W x 24″D x 29″H
Huber CC-902 (standard package)

  • Temperature: -90°…200°C
  • Heating Capacity: 1,5 kW
  • Cooling Capacity
    • at 100C, 20C, 0C: 1,2 kW
    • at -20C: 1,1 kW
    • at -40C: 0,9 kW
    • at -60C: 0,6 kW
    • at -80C: 0,2 kW
  • Cooling Machine: Air-cooled, CFC-&HCFC-free
  • Power Supply: 230V 1~50/60Hz
  • Current Max: 13,2A
  • Pump Connections: M16
  • Dimensions: 550W x 600D x 911H (mm)

Julabo SL-12 (standard package)

  • Temperature: +20…+300°C
  • Heating capacity: 3 kW
  • Power requirements: 230V/50-60Hz/13A
  • Pump connections: M16 female
  • Dimensions: 11.8″W x 16.9″L x 18.5″H

Huber CS-100 (standard package)

  • Temperature: -20C up to +25C
  • Heating Capacity: 1,5 kW
  • Cooling Capacity: 10W at 10C water supply temperature and max. 32C ambient temperature
  • Cooling Machine: Air-cooled, CFC- & HCFC-free
  • Power Supply: 208V 3~60Hz or 460V 3~60Hz
  • Current Max: 7,7A
  • Pump Connections: G3/4″ male
  • Dimensions: 800W x 850D x 1665H (mm)

Julabo Presto A80
(upgrade option for Huber CC-902)

  • Temperature: -80°…+250°C
  • Heating Capacity: 1.5 kW
  • Cooling Capacity
    • at 20C: 1.2 kW
    • at 0C: 1.2 kW
    • at -20C, 1.1 kW
    • at -40C 1.1 kW
    • at -80C 0.1 kW
  • Cooling of compressor: 2-stage air
  • Power requirements: 208V/60Hz/15A (Nema N5-20 plug)
  • Pump connections: M24x1.5 male

Choose between the following lab design solutions:

Option 1: Off-The-Shelf Lab Plan

Pre-developed, economical design packages from our on-staff architects and MEP engineers for some of the most common lab layouts & equipment packages utilizing Precision® extraction equipment. Explains general hazards & workflows, power, water and airflows.

  • Quickest, time-saving design solution
  • Explains general hazards & workflows, power, water and airflows.

Includes:

  • Diagrammatic floor plans with suggested sizes
  • Estimated MAQ/HMIS table (w/ disclaimers)
  • Lab plan with equipment tags
  • Interior lab elevations
  • Diagrammatic workflow plans
  • Diagrammatic MEP drawings

Excludes:

  • Fire report
  • Permit drawings
  • Plan revisions
Option 2: Custom Concept Lab Plans

Provides a conceptual drawing package, showing the location of rooms, makeup of walls, and location of equipment for the lab within the building. MEP engineering plans are NOT included.

  • Approx. 2-4 weeks for completion
  • Plans are customized for extraction and post processing equipment
  • Great for investors, city planning officials and state license board presentation.

Includes:

  • Full custom lab design within specific client building
  • Cover sheet
  • Floor plan with dimensions and ratings
  • Full HMIS report
  • Lab plan with equipment tags
  • Interior lab elevations
  • Workflow plans (lab & solvent)

Excludes:

  • Fire report
  • Permit drawings
  • Plan revisions
The Basic Install and Training course is Precision’s all-encompassing primary extraction system installation and training program. Three days of on-site hands-on training, support and knowledge packed into one extremely valuable package is included in the PX1 Extraction Lab Package.

3-Day, Basic Install and Training Course Overview

Ready To Get Started?

Contact us to receive your package quote, discuss upgrades or get answers to any questions you might have.

Request My Quote
PSI

Pre-Approved for Easy Certification

The X10 extractor, GC 5000 compressor and EXP Room are all pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your extraction lab package is installed by a Precision® Technician, simply call PSI and schedule your field verification. Simple as that!

PSI

Pre-Approved for Easy Certification

The X10 extractor, GC 5000 compressor and EXP Room are all pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your extraction lab package is installed by a Precision® Technician, simply call PSI and schedule your field verification. Simple as that!

Extraction Lab Package Finance

Financing Your Extraction Lab Package

Acquiring extraction lab equipment is likely one of the most substantial and important capital investments you will make. Our financing partners make the acquisition of a Precision extraction lab package fast, easy, and economical.

View Lending Partners

I’m Interested In Learning More

To speak with a Precision sales representative or receive a quote, please complete the form below.