G3X-R Improvements & Features
The 20L G3X-R kit is built upon the G3X platform, which includes valved discharge points on the primary and secondary receivers for the ability to switch collection flasks during live operation. The kit also includes two (2) distillation head inserts: an evacuated, Vigreux-indented insert and a temperature-controllable fluid-filled finger insert. These inserts provide extra surface area within the fractionating column, which allows users to utilize various reflux ratios to separate compounds as they choose.
Additionally, G3X systems include a primary/secondary condenser setup, giving users the ability to run jacketless condensers or hot condensers for additional separation. The liquid-cooled secondary condenser (LS-A90-VC45) replaces the air condenser on previous full bore systems, providing more surface area and the ability to cool the finger to a desired temperature.
Features
- All improvements and features from G3 series
- 150mm Reactor Flange distillation head (LS-DH-150HE) with 100mm distillation column
- Distillation head inserts (2):
- Evacuated, Vigreux-indented insert
- Temperature-controllable fluid-filled finger insert
- Fiberglass Insulator to retain radiant heat in space between silvered jacket and heating mantle system
- Secondary Cold Finger Condenser (LS-A90-VC45) for use with jacketless condenser, hot condenser, or high-efficiency fraction collection within the system
- Angled Isolation Valves:
- Inline distribution adapter (swing arm/primary collection) valve with vacuum release for unlimited fraction collection
- Distribution receiver (secondary collection) valve with vacuum release for unlimited fraction collection
Specifications
•BATCH CAPACITY: 10,000mL
(approx. 10,000g dewaxed oil)
•OPTIMUM CAPACITY: 7,000 – 9,000mL
•ABSOLUTE MAX. CAPACITY: 12,000mL
(approx. 12,000g dewaxed oil)
•MAIN BODY FRACTION FLOW RATE:
2,000 – 4,500g/hour
•BATCH DURATION: 4-10 Hours
(Estimated – batch durations are dependent upon primary extraction method, pre-processing methodology and material composition.)
•BENCHTOP SIZE: 45” x 27” x 42”
(not including pump/trap/circulator)
•DISTILLATION HEAD: DH-150HE
SYSTEM AND ELECTRICAL PARAMETERS
•HEATING MANTLE
-1750w, 120V, 15.2 amps / EU 1750w, 230V, 7.7 amp
-Max. System Temperature: 260°C
(PTFE/PFA temp. limit)
•STIRRING MOTOR
-110 – 240V, 50/60 Hz, 2 amp
-Speed Range: 100-1850 rpm
•VACUUM MONITORING
-100 – 240V, 50/60 Hz, 0.3 amp
-Range: 1 mTorr – 760 Torr
•TEMPERATURE MONITORING
-100-240V, 50/60 Hz, 1 amp
Compliance
Complete System
Peer-Reviewed, GMP Compliant
Heating Mantles
CSA
CAN/CSA C284101, C22.2 No. 88
Temperature Controller
NRTL, QPS, CE, Constructed with 100% UL and CSA listed parts.
UL 61010-1; 61010-2-201
CAN/CSA 61010-1, C22.2
Temperature Monitor
CE, Constructed with 100% UL and CSA listed parts.
Stir Controller
CE, Constructed with 100% UL and CSA listed parts.
Vacuum Monitor
RoHS / CE / NRTL
Glassware
Meets ASTM specification E438, type 1, class A, Kimble Kimax or Schott Duran Glass
Warranty Information
Documents
Training
Precision offers the following on-site product installation and training with experienced extraction technicians:
- Extract Product Engineering
- Distillation Prep
- Distillation Training
More information
WHAT’S IN THE BOX:
-Documentation & SOPs for GMP integration
-Electronic controllers & monitors
-Glassware, supports, & clamps
-Technical Support & Warranties
G3X-R also includes:
-LS Evacuated, Structured Head Insert
-LS Cold Finger Head Insert
-LS Fiberglass Insulator for Distillation Head
-LS Jacketless Condenser
-LS 90° Adapter with Vertical Condenser
-LS Swing Arm with Angled Take-Off Valve
-LS Distribution Adapter with Angled
Take-Off Valve
Installation Notes:
Installing Benchtop Short Path Distillation Kits
G3X-R Parts List: