COLDWELL Vacuum Cold Trap Vessel for MAXTRAP
Keep vacuum purging while your original trap is being reclaimed, cleaned, refreshed in conjunction with the MAXTRAP Mechanically Refrigerated Cold Trap.
For large volume, 24-hour processing, or vacuum purging it is recommended that a second, spare COLDWELL is purchased.
The secondary COLDWELL can be dropped into place, so processing continues while the full trap is cleaned and defrosted. Avoid any downtime with this extra COLDWELL insert.
COLDWELL Vacuum Cold Trap Differences
The key to quality cold trap performance is: time, surface area, and temperature.
Most cold traps have very narrow inlets and outlets, slowing down your process. Not Cascade’s COLDWELL vacuum cold trap! Full KF25 inlet and outlet connections never reduce flow.
Most cold traps have a glass or a smaller surface area to collect the matter your vacuum pump would otherwise ingest. Cascade’s COLDWELL surface area is a patent pending series of filter baffles sitting inside.
Unlike most glass traps, Cascade’s COLDWELL is made of 304 stainless steel. If you drop it, the only thing that may break is your toe.
- Cascade’s COLDWELL Vacuum Cold Trap
- Viton Gasket
- KF-25 Connection Lines & Hardware
- 3mm Neoprene Insulator Cap
COLDWELL Safety Tips
At very cold temperatures solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.
304 Stainless Steel
Neoprene Insulation Cap
KF25 Inlet & Outlet
INTERIOR VESSEL DIMENSIONS
8″ Deep x 5.75″ Diameter
8.5″ H x 6.5″ W
3 Quarts (2839 mL)