Quick Set-Up & Top-Class Safety

Designed to be easily set up in less than a day, the EXP’s H-channel construction offers a sleek appearance, a stable atmosphere and high durability, all without exposed nuts, bolts, cables or wires. The EXP extraction room is engineer peer reviewed, stamped and compliant for use in all regulated jurisdictions.†

Precision EXP C1D1 Extraction Rooms

Warranty: 1-Year

EXP Room
Extraction Booth

Designed for
Cannabis & Hemp Extraction

Sizes
2 options available

Safety
Audible and visual UL listed & IFC compliant alarming systems
No exposed wires or cables

Compliance

  • NFPA sections: 33, 58, 70, 101
  • OSHA Safety and Health Standards compliant
  • International Fire and Building Codes 2018
  • UL Listed Components
  • PSI Certified – 50 State Compliant

Warranty: 1-Year

  • Comes with all fittings and wiring for installation
  • Designed to reduce the number of joints and seams in the cabin’s construction
  • Pre-coated, dual-skin insulated panels provide a smooth fit and finish with no exposed wires or cables
  • Catalytic bead UL listed flammable gas detection with adjustable set point between 10-50% LEL
  • Audible and visual UL listed and IFC compliant alarming systems
  • Explosion proof manual pull station activates high CFM fan but not alarms for off-gassing
  • Booth features vertical wall panels designed to reduce the number of joints and seams in the cabin’s construction
  • UL Listed Components
  • NFPA sections: 33, 58, 70, 101
  • OSHA Safety and Health Standards compliant
  • International Fire and Building Codes 2018
  • PSI Certified in all 50 states
Precision EXP Room 1 Extraction Room Plans

EXP Room 1

Working Dimensions 10’W x 8’H x 12’6″D
Approx. Overall Dimensions 10’5″W x 8’2″H x 13’11″D
Weight 3,383 lb
Shipping Weight 3,690 lb
Total Power Consumed 2 kW @ 110V
Flow Emergency 100 LFPM
Linear Plane Static 1 CFM per 1 CF
Min. Fan Static 1,200 CFM
Working Dimension
10’W x 8’H x 12’6″D
Approx. Overall Dimensions
10’5″W x 8’2″H x 13’11″D
Weight
3,383 lb
Shipping Weight
3,690 lb
Total Power Consumed
2 kW @ 110V
Flow Emergency
100 LFPM
Linear Plane Static
1 CFM per 1 CF
Min. Fan Static
1,200 CFM
X10 MSE Valve Close Up

EXP Room 2

Working Dimensions 20’W x 8’H x 12’6″D
Approx. Overall Dimensions 20’5″W x 8’8″H x 13’11″D
Weight 5,365 lb
Shipping Weight 5,972 lb
Total Power Consumed 4 kW @ 110V
Flow Emergency 100 LFPM
Linear Plane Static 1 CFM per 1 CF
Min. Fan Static 2,300 CFM
Working Dimensions
20’W x 8’H x 12’6″D
Approx. Overall Dimensions
20’5″W x 8’8″H x 13’11″D
Weight
5,365 lb
Shipping Weight
5,972 lb
Total Power Consumed
4 kW @ 110V
Flow Emergency
100 LFPM
Linear Plane Static
1 CFM per 1 CF
Min. Fan Static
2,300 CFM
Precision C1D1 Extraction Room Gas Detection

Gas Detection Kit

  • Gas Detector with Color Display and IR Sensor
  • Controller, 2 Channel HMI with Touch Color Display and 6 On-board Relays
  • Calibration Kit for 6 Month and Annual Maintenance
  • C1D2 Horn, 24vdc
  • C1D1 Strobe, 24vdc
  • Detailed Drawing and Setup Instructions with Wiring Schematic
  • Technical Support per Site/End-User When Required*

*Installation completed by the end customer
*1-year manufacturers warranty on supplied equipment. Any equipment needing replaced due to manufacture’s
malfunction will be replaced under the warranty clause. Labor will be charged.

Exhaust & Purge Kits

EXP Room 1

EXP Room 1

Exhaust System

Exhaust System

12” ATA Tube axial in-line exhaust fan*
(1,100 Total CFM @ ¼” s.p.)

3/4 h.p. tri-voltage 220 volts, 1 phase, 60 hz TEFC
high efficiency motor with variable pitch drive
sheave**

Purge System

Purge System

24” ATA Tube axial in-line exhaust fan*
(6,900 Total CFM @ ¼” s.p.)

2 h.p. tri-voltage 220 volts, 1 phase, 60 hz TEFC high
efficiency motor with variable pitch drive sheave**

EXP Room 2

EXP Room 2

Exhaust System

Exhaust System

18” ATA Tube axial in-line exhaust fan*
(2,200 Total CFM @ ¼” s.p.)

1/2 h.p. tri-voltage 220 volts, 1 phase, 60 hz TEFC
high efficiency motor with variable pitch drive
sheave**

Purge System

Purge System

30” ATA Tube axial in-line exhaust fan*
(14,400 Total CFM @ ¼” s.p.)

5 h.p. tri-voltage 220 volts, 1 phase, 60 hz TEFC high
efficiency motor with variable pitch drive sheave**

*Tube axial fans feature a continuously welded housing for an airtight seal. The propellers are non-sparking cast aluminum for consistent air velocity at higher static pressures. The universal motor plates will allow adjustable belt tensioning. The bearings are of premium air handling quality, self-aligning, and have an L10 life of 40,000 hours. The belt guard provides protection from the rotating pulley (OSHA Requirement). Fan has been designed per AMCA 210 Standards.

**Motors feature a heavy gauge steel frame, double sealed ball bearings that are mechanically locked on the shaft end, and bolt on motor base for easy removal. The service factors for the motor are 1.15 for 3-phase power and 1.0 on 1-phase power. UL recognized and CSA certified.

LED Lighting

EXP Room 1

EXP Room 1

Lighting Kit

3 qty – LED-Fluorescent light fixtures, inside access 48” 4-tube, LED, dual voltage-120/277 with LED tubes included

EXP Room 2

EXP Room 2

Lighting Kit

6 qty – LED-Fluorescent light fixtures, inside access 48”  4-tube, LED, dual voltage-120/277 with LED tubes included

  • Lights are Class I, Division 2 rated.
  • Lights are ETL & ETL-C listed and are also listed for locations having deposits of readily   combustible paint residue.
  • Instant start (starting temperature at 0 degrees F.)
  • T-8 electronic ballast provides greater energy savings.
  • The lamp holders are twist in style.
  • The lights feature front/inside access for easy lamp replacement and are equipped with an interlock switch to disable painting operations when light access door is opened.

Note: fixtures come with whips that run inside panel construction for plug and play connections.

PSI

Pre-Approved for Easy Certification

The EXP Rooms are pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your room is installed, simply call PSI and schedule your field verification. Simple as that!

PSI

Pre-Approved for Easy Certification

The EXP Rooms are pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations.

Once your system is installed, simply call PSI and schedule your field verification. Simple as that!

Complete Your Lab

Everything you need for your extraction room

ASE 100
ASE 100

Solvent Recovery

Learn More
X10 MSE

Extraction

Learn More
RV 100 Vessel
RV 100

Reactionary Vessel

Learn More
Precision CDU 1000
CDU 1000

Distillation

Learn More
C1D1 Cannabis Extraction Room Financing

Financing Available

Acquiring extraction equipment is likely one of the most substantial and important capital investments you will make for your business. Our financing programs make the acquisition of a C1D1 extraction room fast, easy, and economical. Whether you need to expand your current capacity or replace outdated equipment, Precision has a financing solution for you.

Speak with a Rep

In Good Company

We love our customers, a lot. If we name drop, it’s only because we’re so proud of their amazing work and to be called their partners.

I’m Interested In Learning More

To speak with a Precision sales representative or receive a quote, please complete the form below.